Skip to main content

Simple Toilet Repairs You Can Do On Your Own

Toilets are ubiquitous fixtures, present in every sort of home and business. Despite their constant presence, many homeowners may not know how to fix minor issues with their toilets - and when to draw the line and call in the professionals at Roto-Rooter. Let's review a few simple toilet repairs you can do on your own:

Many people think of repairing a toilet and immediately start considering plumbing issues. There are parts of a toilet that can break or become misaligned without affecting connected pipes or water flow, however. A broken seat or lid is such an issue, and something eventually encountered by many homeowners. A new seat can also freshen up a toilet's appearance, and the first steps of the process detailed below can also help fix a loose seat.

Replacing or adjusting a lid / seat is a relatively simple process. First, locate the two hinges where the seat screws into the fixture. These are typically located under a plastic cover that must be pried up or popped open. Then, unscrew the nuts and plastic washers. To replace the seat, remove the nuts, washers and bolts, then follow the process in reverse to attach a new lid / seat. To repair a loose or misaligned toilet seat, adjust to the angle you desire and re-tighten the nuts to attached to the hinge bolts.

Fixing a running toilet

A running toilet may be an easy fix at home or indicative of a more complex problem. A few easy toilet repairs to consider include replacing the flapper valve. The flapper is the flexible rubber valve attached to the flush lever. It’s job is to stop the flow of water once the toilet's tank is filled. Since the flapper is made of rubber, it can degrade due to wear or become stiff so that it is no longer flexible enough to form a good seal. Sometimes the flapper closes down over the chain that connects it to the flush lever, preventing it from sealing. Adjusting the chain can fix that problem, while replacing the flapper itself is also a simple affair. If the flapper allows water to flow when the tank is full, it's time to replace it.

You should turn off water flowing to the toilet, then flush it to remove most of the remaining water in the tank. At that point, assess how the flapper is connected to the toilet and remove it. Bring the old flapper with you to a hardware store and select a substantially similar model, taking care to ensure the size is the same. Then, follow the package's instructions to install the new flapper and do away with the annoyance of a running toilet. Roto-Rooter created a useful video with step-by-step instructions for replacing a flapper.

Are you encountering issues with a toilet that seem too complicated to fix on your own? Call Roto-Rooter to gain expert assistance and repair your toilet.



Related Articles