Filter by: "waterDamage"
Ever notice a little pool of water gathering underneath your refrigerator? As much as we'd like our appliances to constantly be in tip-top shape, that's not always the case. Fixtures go on the fritz, but sometimes they're fixable. Here are some quick ways to stop a leaking refrigerator:
Replace the filter
Sometimes, all your refrigerator needs is a new filter. Over time, filters experience wear and tear, and eventually start leaking water. If you've had yours for awhile, it's time to replace it. Just head out to your local hardware store to pick up another. It should come with easy instructions on how to safely remove your old one, and replace it with the new fixture. This swap should fix your leakage issue.
Examine your defrost drain
Over time, defrost drains become clogged with various materials. Since they're located inside of the refrigerator (usually on the ceiling between your fridge and freezer), they're exposed to many different things. Examine the drain to see if there is any ice or food. coated on it. If it's ice, pour hot water down the drain to melt it. If it's food, use a handy tool or sturdy wire to clean out the entire area.
Check the ice maker
If water is forming underneath your appliance, it could be that something is wrong with your refrigerator's ice maker. Luckily, this is easy to fix. Shut off the water to that valve, which is normally located underneath the sink. If not, you probably can find it in your basement directly underneath the fridge. Turn off the flow of water to the ice maker so the puddle stops growing. Then, give your Roto-Rooter plumber a call to decide how to proceed.
As a homeowner, flooding is one of the worst nightmares you can experience. Heavy rainfall in New Orleans, Louisianna, can cause serious water damage to your property- both inside and out. Flooding can overwhelm a home's sewer system, slowing down your sump pump's ability to handle water runoff. If you live on a floodplain, your risk for flooding may worsen during heavy storms.
What's a floodplain?
A floodplain is low-lying area that is usually located between two higher grounds. Such terrains are adjacent to bodies of water like streams, rivers, lakes, ponds or oceans. Because of this, properties that are located on a floodplain are highly susceptible to flooding
How do I know if I live on a floodplain?
Knowing if your property is located within a floodplain is critical to keeping your family and your home safe during a flood. Even if you aren't in plain sight of a body of water, that doesn't mean your home is far away from one. While this is a rather broad interpretation, the Federal Emergency Management Agency can help narrow it down for you. Simply visit the FEMA Flood Map Service Center and type in your address,and it will show you how close in proximity you are to a floodplain.
How can I protect my home?
If you do happen to reside in an area that has been deemed a floodplain, there are certain measures you can take to help mitigate flooding to protect your home. Contact your local Roto-Rooter professional to discuss ventilating your pipes. This can help prevent water from entering your home during serious weather conditions.
What if my home is already flooding?
Consult a licensed plumber to see what the damage is before trying to tackle it yourself. You might be facing replacements of your outdoor piping system, your sump pump and your plumbing fixtures. While these appliances are durable and made to last, Mother Nature's strong winds are quite fierce. Especially during those Louisianna hurricanes.
For more information on how to prepare and protect your home from a flood, contact your local New Orleans Roto-Rooter professional today.
Imagine, coming home from a 2 week vacation in the Caribbean to a basement full of black water up to your ankles. Everyone’s worst nightmare, right? So you think to yourself, what now or where do I start in cleaning this up? Your answer to all of these questions, Roto-Rooter. You probably know Roto-Rooter is North America’s largest provider of plumbing, sewer and drain service. But Roto-Rooter is also the company to call for water cleanup and water restoration service. Roto-Rooter fields state of the art water removal and mitigation equipment and knowledgeable well-trained technicians.
40 percent of all homeowners will experience some sort of water damage and 93 percent of all water damage can be prevented. Roto-Rooter has the certified experts who can quickly remove all standing water and the destruction left behind. They can also take steps to prevent this kind of trouble from ever happening again. On the Roto-Rooter website you’ll find this handy infographic which can be printed and placed somewhere in your home for future reference. It shows how to manage water damage. It also provides instructions explaining what to do when you discover water inside your home and offers tips for preventing damage in the future. This informational infographic also helps you find the root of the problem whether it be a burst pipe, sewer backup or a weather related matter.
Referring to the Roto-Rooter how to manage water damage infographic can prevent major stress and aggravation during a difficult time when emotions can cloud your judgment. Just a few inches of water can do serious harm to your home and after a long relaxing vacation, water damage is the last thing anyone wants to come home to.
Mold is a homeowner's worst nightmare. It not only looks gross, it can be a serious health risk for you and your family. There are plenty of areas in your home that are susceptible to mold growth, especially rooms with plumbing fixtures such as the bathroom, laundry room and kitchen. Here is what you need to know about mold to protect your Minneapolis, Minnesota, home.
What is mold?
Mold is a type of fungus made up of decomposed or dead organic material such as leaves, wood and plants. In small quantities, it is not harmful to humans. However, mold can cause serious health concerns for those exposed to large amounts mold, especially black mold, over time. Mold can cause even worse health problems in people with weakened immune systems.
Signs of mold
It can be hard to miss mold if it isn't visible, but most mold thrives in dark, damp places - which can include spots you can't see, like your ceilings or beneath the floor. However, our bodies can be very affected by this growing fungi, as can the other living things in our homes like pets and plants.
If you notice your allergies are a lot worse when you're inside your house, it could be a sign of growing mold. This fungi can also be very odorous. If you smell a strange, pungent odor, the culprit may be mold. Lastly, some mold is easy to spot because of it's clearly visible growth. Small mold patches must not be ignored because this bacteria can spread easily.
The important thing to remember is to be very aware of your surroundings so mold doesn't slip by without you noticing. Having mold checks a couple of times a year is a good way to ensure that you don't miss this harmful fungi.
How to be proactive
If you discover you have mold, waste no time hiring a professional to get rid of it. There are also plenty of preventative measures you can take to ensure this fungus doesn't grow in your house. Here are a couple of them:
Be sure to clean regularly to kill harmful bacteria.
Fix any leaky faucets or other plumbing fixtures.
Take preventative action during storms if you have a basement susceptible to flooding.
Dry wet areas immediately.
Regulate your home's temperature with an air conditioner.
It's important to remember to keep a close eye on all your plumbing fixtures because mold cannot grow without water. Most mold can grow if your home is wet for more than 24 hours.
Mold is no joke. At the first sign of large mold growth call your local Minneapolis Roto-Rooter for removal advice.
A busted pipe is something no one wants to deal with. It's inconvenient, environmentally unsustainable and extremely costly to repair. To prevent a pipe from bursting in your Colorado Springs, Colorado, home, there are certain precautions you can take, but one quick piece of advice: Always be mindful of your plumbing system, especially when the temperature starts to fluctuate.
Here are six tips to help curb your pipes from bursting:
1. Provide protection
Your outdoor faucets, spigots and pipes should be protected with an insulating dome. Simply place this over your fixtures to protect them from ice and frost that could cause your pipes to expand, burst and then leak. Insulating domes are available at your local hardware stores and online.
2. Manipulate the air flow
Typically, pipes located near an outside wall or window have a higher chance of freezing. To help avert these pipes from bursting, manipulate the flow of air in your home. Do so by directing the warm air toward the areas where your pipes are located. This goes for your kitchen sink, too. Leave the cabinets under your sink open to allow warm air to flow through them.
3. Lock in the leak
If your electrical wiring, dryer vents and pipes have any leaks, this could potentially allow cold air into your home. Lock in the leak and seal it with caulk or other means of insulation, like heat tape, to keep the cold air from flowing through your pipes. Even the slightest breath of air has potential to cause a significant amount of damage to your pipes.
4. Let the water flow
Release the pressure in your piping systems by allowing a slow drip of water to flow through your faucets. This will reduce the likelihood of a rupture, as you're slowing relieving some of that pressure that built up during the winter.
5. Crank the heat up
To prevent your pipes from freezing, crank the heat up a bit. Be sure not to let the temperature drop to 32 degrees Fahrenheit (water's freezing point) in any areas of your home where there are water lines.
6. Don't stuff your cabinets
Try to limit the amount of cleaning supplies and extra toiletries you keep underneath the sinks in your kitchen and bathrooms. If you store heavy items or pile them up too high, this could warp the pipes, eventually leading to a crack.
For more information on how to protect your pipes and prevent them from bursting, contact your local Colorado Springs Roto-Rooter professional today.
Scoping out your home for water damage can be pretty tricky - especially if you aren't exactly sure what to look for. Whether your Tampa, Florida, home is modern or ancient, the threat of water damage is the same. Some signs of destruction are evident, while others can be so subtle they eventually creep up on you.
Here are six signs of water damage in your home:
1. Water stains
Discoloration, stains on the ceilings or walls, a damp carpet: All are telltale signs of water damage. Chances are there's a hidden leak caused by a cracked pipe that is now leaking. Contact your local Roto-Rooter professional, and have him or her check it out.
2. Mold growth
Mold growth is a crystal-clear sign of water damage, and it's also bad for your health, so get this checked out right way. Moisture could be lurking behind the walls or hidden in your pipes, so be sure to contact an expert to help locate where the damage originates from.
3. Warping or buckling
Another clear sign of water damage is warping or buckling of the floors and walls. Drywall or wood absorbs the leaking water, swells up and then warps over time. Buckling can be easily seen by the untrained eye or felt by running your hand over the wall or floor.
4. Crumbling or rotting wood
Check the area around your windows. If you notice the wood looks a bit crumbly, this is another clear sign of water infiltration. You'll want to check your baseboards, too. Once the water is absorbed into the wood, the material starts to dry. As it dries, it will crumble, rot and eventually deteriorate altogether.
5. Foul smell
While water damage may be able to hide in plain sight, definitely trust your nose. If you start to smell something funky, chances are the damage is done and water unwillingly invited itself into your home. If you frequently experience the scent of general dampness or mildew, call a plumber before the situation worsens.
6. Corroded pipes
If you happen to spot any corrosion around the pipe connections in your kitchen, bathrooms, laundry room and basement, water damage may slowly start to occur if it hasn't already. While you're at it, check the caulking around your bathroom fixtures. Water flow can cause the caulking to break apart and escape into the creases. Be on the lookout for missing grout or signs of mold here, too.
Water leaks can wreak havoc on your home, often causing damage that's difficult and costly to repair. However, sometimes it's hard to know there's a leak until the damage has already been done. If you suspect you are in need of leak repair in the plumbing of your Santa Fe, New Mexico, home - or you simply want to know how to spot one before it becomes a larger issue - take a look at these three signs you should keep in mind:
You hear a hissing sound
Whether you live in a brand new house or one that's a century old, your plumbing may make a multitude of noises, from clanking to gurgling and more. However, there's one sound in particular you should listen for that could indicate a leak: hissing. Hissing is typically a sign a valve isn't closing properly in some part of your plumbing - homeowners often notice the sound in their toilet tank or coming from their water heater. If the sound is coming from your toilet, put a couple of drops of food coloring in your tank, then watch the bowl to see if the color leaks into the water there. If it does, you have a leak.
You see mildew, mold or other signs of water damage
Mildew and mold grow from excessive dampness, humidity and standing water, so if you have a leak in your home that causes any of these, mold and mildew are a surefire sign of it. You should also look for dark spots on your ceiling (especially if they're growing larger), dimpling wall paper, peeling paint or warping floors - any of these could be caused by water damage from a leak.
Your water bill increases
The plumbing that runs throughout and around people's homes is extensive, so sometimes the only way someone knows there's a leak is because his or her water bill starts to increase. If you believe you may have one, here's a handy way to confirm it: Look at your main water meter, and write down the level you see. Then, turn off your main shut-off valve for several hours and don't use any water during this time. Check the meter again - if it's lower than it was before, you have a leak.
Call a professional
If you aren't sure whether you have a leak or not - or you know you have one but you aren't sure how to fix it - a local Santa Fe Roto-Rooter professional can help. He or she will be able to track down the leak and repair it quickly
First things first: Assess the situation
Whether you're returning home after fleeing a flooding incident caused by a storm or an overflowing river, or you've gotten back from a recent vacation to a water-logged basement, the first thing to do following a flood is to assess the damage. You should immediately look for any indicators of structural damage to the home. If you suspect that any utilities – gas, oil, electricity, sewage leaks, etc. – have been impacted, contact the respective utility company.
If you must enter the water for any reason, be sure to wear waders or waterproof boots that are higher than the water level. Even if the power is out, disable all fuse connections to reduce the risk of electrocution should it come back on. Use a flashlight for visibility. Remember, your top priority is safety. Finally, make sure your insurance agent has been made aware of the event.
Begin the cleanup
If the flood water is from a sanitary source such as a sink, a broken water supply line or rain and has been standing for less than 48 hours, it could be a do-it-yourself job. If this is the case, the first priority should be to get all of the water out. If it sits for 48 hours or more, it can become gray water, at which point it will need to be handled professionally.
Assuming that the water accumulation isn't extensive enough that it will need to be pumped out, you can start by using a mop to soak up some of the excess water. Once any pooling and puddles have been cleared away, you can set up a wet-dry vacuum cleaner. It's safer to do it this way since there will be less water, and a reduced chance of the appliance's power cord causing a shock.
Know when to call a professional
To reiterate, if the water has been standing for 48 hours or more, call a professional. Also, if the source of the leak is discharge from a household appliance such as a dishwasher or a washing machine, the resulting water will be classified as gray water. This demands professional treatment. Last but not least, gray water that has been allowed to soak for 48 hours may become black water, at which point it is extremely dangerous. Other sources of black water include overflowing rivers, ocean water or streams. Black water contains dangerous pathogens and should never be handled alone.
If you ever find yourself in any of the above situations, or if you're just overwhelmed and need a helping hand, contact your Palm Bay Roto-Rooter right away.
If your home could potentially flood - whether it's due to heavy rains or plumbing mishaps - it's important to know how to prevent flooding and clean harmful mold that may grow as a result of water damage. Here are a few tips to keep in mind:
Remove as much water as possible
As soon as you can after water starts to accumulate in your home, you should remove as much of it as possible. Use buckets, an emergency water pump or even a wet/dry vacuum until any standing water is cleared away. Safety note: You must turn off your electricity completely before dealing with any water in your home - if you're not sure how, it may be best to call in a professional.
Take advantage of professional water restoration services
Speaking of calling in a professional, the No. 1 best way to avoid the growth of mold after water damage in your home is to schedule water restoration services with your local Knoxville Roto-Rooter. The restoration team will fix the origin of the problem (if it's plumbing-related and not weather-related), remove standing water, take out any damaged drywall, carpeting or flooring, and use professional equipment to dry the room completely, preventing any possibility of mold growth.
Know what to look for
If the water damage to your home is minimal, and you choose to clean and dry the space yourself, stay vigilant about the potential growth of mold over the next several weeks. Rather than relying on mold testing, simply inspect the damaged area carefully, looking for any visual signs of growth or odd smells that could indicate the presence of dangerous microorganisms.
Mold often shows up in the form of fuzzy green, brown and black spores.
Remove mold carefully
If you do find mold, use caution when removing it to keep yourself and your family safe. Throw out any furniture, upholstery or other items that have begun to grow mold, and clean your walls and floors with a mixture of detergent and water. Wear face masks or respirators the entire time you're in the room. If the mold growth is extensive, it's a good idea to have professionals clean it for you - they'll do so safely and efficiently.
Are you noticing signs of a refrigerator leak? If you have a leak in your kitchen, but you know that it is not coming from the sink or dishwasher, chances are your refrigerator is the culprit. Check underneath your fridge for signs of pooling water. If you are unsure of what is causing your refrigerator leak, here are three possibilities:
If your filter is not installed properly, or the filter is old or doesn't fit correctly with your refrigerator model, chances are there is a poor connection between the filter and the water supply. To prevent your refrigerator from leaking, check to see if water is escaping due to holes in the filter. Also, check the size and model of both the fridge and filter to ensure it's a perfect match.
Examine the drain pan for any cracks, which is located at the bottom of the refrigerator. It's okay if you spot a tiny bit of water. However, if you notice a significant amount of pooling, chances are the pan has a crack and that's what is causing the leak. Replace the pan immediately if you notice any damage.
One of the most common causes of a leaky refrigerator is a faulty defrost drain. When the defrost drain is blocked by food particles or ice, it prevents the water accumulated during the defrost cycle to properly drain into the pan. Eventually, water will start to build up. Without anywhere to drain, water will begin to flow right onto your floor. Remove any blockage caused by food particles or ice by flushing the drain with hot water and removing debris with a wire hanger.
For more information on flooding due to appliance failure, contact your local Roto-Rooter professional today. In the event of a water emergency, Roto-Rooter is simply the best when dealing with water damage clean up and restoration of all kinds.
We use your ZIP code to give you local services and offers.