RSS

Roto-Rooter Blog

Filter by: "leakDetection"

  • 3 Possible Causes of a Leaky Refrigerator | Roto-Rooter Blog

    Water dropIs your refrigerator running? Well, you better go catch it! Although this may sound like a joke, we're actually pretty serious. If you have a leak in your kitchen, but notice it's not coming from the sink or dishwasher, chances are your refrigerator is the culprit. If you find yourself poking around the fridge and are still not seeing any pools of water, check underneath the appliance. Ah ha - there it is!

    Not sure what's causing the leak? Here are three possibilities:

    1. Water filter

    If your filter is installed improperly, old or doesn't fit with the model of your refrigerator, chances are there is a poor connection between the filter itself and the supply of water. To prevent the appliance from leaking, check to see if water is escaping due to holes in the filter. Also check the size and model of both the fridge and filter to ensure it's a perfect match.

    2. Drain pan

    Check the drain pan, located at the bottom of the refrigerator, for any cracks. It's okay if you spot a tiny bit of water, but if you see a significant amount of pooling, chances are the pan has a crack and that's what's causing the leak. If you notice any damage, replace the pan immediately.

    3. Defrost drain

    One of the most common causes of a leaky refrigerator is a faulty defrost drain. When the drain is blocked by food particles or ice, it prevents the water accumulated during the defrost cycle to properly drain into the pan. Eventually, water will start to build up, and since it has nowhere to drain, it will flow right onto your floor. Remove the blockage by flushing the drain with hot water and removing debris with a wire hanger.

    For more information on flooding due to appliance failure, contact your local Roto-Rooter professional today.


  • How to Find and Repair A Bathtub Leak | Roto-Rooter

    Bathtub drainThere are two main areas where a bathtub leak might occur: the faucet drip or the underlying pipes. Additional areas to watch are the grout, body of the tub and the drain. Depending on the nature of the leak, you have different repair options. However, signs of trouble remain constant for both types of leaks. Be on the lookout for curling vinyl flooring or loose tiles, peeling or flaking paint, worn-out wood finishing, water stains on the ceiling, mold on the wall or floor, or general pooling around the base of the tub. Spotting these tell tale signs early might be able to save your bathroom from bigger issues.

    Here's how to successfully find and repair a bathtub leak:

    Find the culprit

    First things first: You must locate the leak before you repair it. It's relatively simple to determine whether or not your faucet or grout is leaking - just check to see if water is spilling out of either area. To test if the actual tub has a leak in it, wipe the outside until it is completely dry and line the area with newspaper. As you begin to fill the tub up, you'll want to keep an eye out for areas of the newspaper that start getting wet.

    To test the drain, completely fill the tub with water. When it's filled, carefully listen for the sound of water seeping out. If you hear those sounds and see the water start to decrease, chances are the drain assembly isn't fully sealed.

    If you aren't experiencing any of the issues listed above, it's most likely coming from your pipes. Contact your local Roto-Rooter and have it take a closer look.

    Repair the leak

    Faucet:

    Start the faucet repair process by completely turning off your water supply. Proceed by removing the plastic caps from the center of the faucet. Next, use a screwdriver to disconnect the handle of the faucet. With a wrench, remove the packing nut used to hold the faucet in place. Replace the stem washers and then secure your new fixtures. Be sure to turn your water supply back on once you're done.

    Grout:

    To restore the grout, locate and clean around the leaking area. If you spot a crack, seal the leak by applying caulking to the crevasses. Before running your water, wait about three hours to allow the sealant to thoroughly dry.

    Tub:

    If you're looking to repair leaks in the actual bathtub, you're going to need a heavy-duty sealant with waterproof powers. Dry the area and apply a generous amount of sealant to the cracks. Use sandpaper to flatten the sealant that is on surface of the tub.

    Drain:

    If the water in your tub is draining quickly, chances are the plumber's putty on the inside of the plug is starting to rub off. Remove the drain plug with a pair of screwdrivers and reapply some putty. You can purchase this at the nearest hardware store.

    For more information on how to repair a bathtub leak, contact your Manchester Roto-Rooter professional today.


  • 3 Leaks You Can Fix Yourself | Roto-Rooter

    The key to addressing plumbing issues is knowing when to call for professional help so you don't worsen the problem which could lead to significant water damage. Luckily, there are a number of leaks you can address on your own that should not cause further issues.

    Here are three leaks that don't require the services of a plumber:

    Loose showerhead connections

    Leaky showerheads are among the simplest fixes. The source of the issue may be that the fixture is loose. In this case, resolving the leak is as easy as tightening the device.

    "Leaky showerheads are among the simplest fixes."

    For more complex showerhead leaks, you'll have to head to the hardware store. While you're there, pick up some Teflon or plumber tape, which will help with creating a tight seal and prevent corrosion. You wrap this tape around the threads.

    When you remove the showerhead, also check that the threads don't have lime scale buildup. If so, soak the part in vinegar and wipe with a cloth before applying the tape. Keep an eye out for worn rubber gaskets and replace them as those could also be the source of the leak.

    Pinhole leaks in copper pipes

    Though all pipework may seem too complex for amateurs, addressing pinhole leaks is not a complex task. If you're handy with a soldering iron, make the repair by cutting out the leaky section and welding in a new one. If you're apprehensive about welding, you can use pipe-repair clamps or epoxy.

    3 Leaks You Can Fix YourselfRegardless which route you take, keep two points in mind: Always shut off water to the entire house before making a repair, and ensure the pipe is completely dry before soldering, applying epoxy or clamping. If the water is left on, you will end up with water all over and a big water damage cleanup project..

    Leaks from faucets

    Leaky faucets are often the result of issues with the gaskets or washers. Simply replacing these items is usually sufficient.

    However, remember that the complexity of the faucet type can make it harder to find the leak. Also, in certain cases, it may be more ideal to replace a faucet, especially an old one.

    Call your local Roto-Rooter for all your professional plumbing needs.

     


  • Fix a Leaking Faucet: 3 Common Faucet Issues & Repairs

    3 Common Causes of Leaking Faucets

    If you're a homeowner, you know there's nothing quite as annoying as the "drip ... drip ... drip" of a leaky bathroom or kitchen faucet. But did you know most dripping faucet issues are actually pretty easy to fix yourself? Depending on the type of faucet you have (there are four: compression, cartridge, ball and ceramic disk), here are three things to look for as soon as your fixture starts to leak:

    1. The washer

    If your faucet has two separate handles that loosen and tighten to turn on the hot and cold water, your faucet has a compression valve. Compression faucets are the only type that uses washers, but these washers are actually one of the most common causes of leaking - they can corrode, become damaged or even just not be installed properly. If you have a compression faucet, try replacing the washers in each handle first - this may fix the problem.

    2. The O-ring

    In many faucets, including cartridge and compression models, O-rings are installed within the handles to create a waterproof seal. When the O-rings become damaged or loose, that seal can break, causing a leak near the handle. If you have a leaking handle, try replacing the O-ring first - just make sure you buy the right size or the new part will be just as non-functional as the old one.

    3. The cartridge

    Cartridge faucets can have one or two handles, so they're most easily distinguishable by how they feel to operate - turning the handle or handles is a bit smoother and easier than a compression or ball faucet. When cartridge faucets are leaking, it's often necessary to replace the entire cartridge valve within them. New cartridges cost about $10-15, depending on where you live, and they are relatively easy to install.

    Remember that if you don't feel comfortable fixing a leaky faucet yourself, it's always a good idea to call a local plumber for help!


  • Environmental Impact of a Leaky Faucet | Roto-Rooter

    Sometimes the solution to a leaking faucet is easier than you might think. Leaky faucets can be caused by loose fixtures or faulty seals that often need tightening or replacement. As with anything that gets frequent use, your faucet parts can wear over time.

    Roto-Rooter’s team of skilled plumbers are trained to easily identify what needs to be repaired or replaced to get your dripping bathroom faucet back to running at peak performance. Often times, simply replacing an O-ring or an inlet or outlet will do the trick.

    It is always important to address a leaky faucet as soon as possible. Not only can a leak be a nuisance but it will also cause an increase on your utility bill- not to mention wasting one of our most precious resources. Learn more helpful water conservation tips at Roto-Rooter online today.

    Interested in some DIY home plumbing repair? Roto-Rooter also offers helpful tips when you are trying to fix your leaky faucet yourself. Our detailed information and step-by-step instruction will walk you through the process.

    Faucet Repair Services

    Whether you need a faucet repaired or you have a more general plumbing issue, the professionals at Roto-Rooter are here to help.  Our team of plumbing experts offers reliable service that you can depend on every time. Call our customer service representatives today to make an appointment or schedule service online.


  • Spring Plumbing Maintenance in Yonkers, NY

    Tackle these spring plumbing maintenance tasks to maintain your Yonkers, New York plumbing.

    Spring is always a great time to perform home maintenance tasks and this includes your plumbing. Here are four plumbing maintenance tasks you should address this season:

    Clean showerheads and faucets

    Showerheads and faucets can become clogged with sediment and build-up, which will affect your water pressure. A simple solution of white vinegar and water will clear away any sediment or mineral deposit build-up.  Add the vinegar solution to a plastic baggie, wrap the bag around each faucet tap and showerhead in your home. Tie a rubber band around the top of the bag to keep the bag in place. Leave your fixtures soaking overnight, then run the water for a couple of minutes and you should immediately notice an improvement in water pressure and flow.

    Check for leaks

    It is important to address leaks immediately. Review your water meter to get an accurate reading. Before bed, turn the water off altogether for the most accurate reading from your meter. Check the meter again in the morning and if the numbers have increased at all, you have a leak in your home.  Checking and repairing leaks is a crucial step in the water conservation

    Add drain strainers

    To keep your plumbing working at peak performance, it is important to take preventative measures against clogs, leaks and other issues. Go through your home and add drain strainers to your bathtubs, showers, sinks and floor drains. Drain strainers will catch hair or other items that shouldn't go down the drain, preventing clogs before they happen.

    Clean out gutters and downspouts

    Clear our any dead leaves, twigs or other debris from your gutters. Use your hose to rinse away any remaining dirt or mud. Aim your water sprayer toward each downspout to clear of debris while making sure it is directing water away from your home’s foundation. 

    If you would like your spring maintenance to be performed by a Roto-Rooter plumbing professional, our local Yonkers expert plumbers can inspect your downspouts and drains to keep your home’s plumbing in top shape all year round.


  • Facing Water Damage to your Home? Turn to Roto-Rooter

    Homeowners facing water damage should remember the Roto-Rooter name

    Water damage can be one of the most trying and difficult problems for homeowners to navigate. There are many causes of water damage including sewer backups, broken water supply pipes, overflowing toilets, sump pump failure and more. Perhaps the most common cause is a burst washing machine hose, which if left unnoticed can gush thousands of gallons of water into a home in a matter of hours.

    Damage from any of those problems can be catastrophic. Definitely requiring a professional team, not just a shop-vac and a few fans. If you ever find yourself facing serious water damage, your first call should be to a company that can both fix the cause of the problem (usually a plumber is the best pro for that) and remove the resulting water and damaged property. This would include carpeting, carpet pad, wet drywall, insulation, furniture, etc. 

    Roto-Rooter has been helping Americans with sewer & drain and plumbing problems for 80 years! We’ve satisfied millions of American home and business owners with fast, professional service. That’s why it makes sense to trust Roto-Rooter to solve your water damage problems too.

    We work with all insurance companies and we use the latest, most advanced equipment and training to ensure that your home or business gets back to normal as quickly as possible.  All Roto-Rooter water restoration technicians are IICRC Certified (Institute of Inspection, Cleaning and Restoration Certification). We follow IICRC S500 standards for professional water restoration.

    For more detailed information about Roto-Rooter’s water restoration service capabilities, we hope you will watch this helpful video.


  • Save Money on Your Water Bill--Tips from Roto-Rooter in Honolulu

    Leaks in your home can cost you a lot of money. First, they can increase your water bill dramatically, especially if the leak is in the toilet. Second, they can cause extensive damage that is costly to repair. Third, they can be a source of mold and mildew that can cause health problems. Roto-Rooter in Honolulu offers the following information to help you find leaks in your home.

    Visually Look for Leaky Faucets

    The easiest and perhaps the most obvious thing to do to find a leak is to walk through your home and make a visual inspection. Check your taps and faucets in the following areas:

    • Showers
    • Bathroom sinks
    • Kitchen sinks
    • Washing machine taps
    • Outdoor taps

    Don't Forget the Outdoor Taps

    It is important to remember the outdoor taps. An outdoor tap that is connected to the house can cause a problem deep inside the walls of your home. When you turn on the outdoor faucet look and see whether or not you are getting full water pressure. Also, when the water is turned off, check to see if the water is dripping out of the tap.

    Signs of a Leak in the Toilet

    leaky toilet is perhaps the biggest money waster of all the leaks. It can waste gallons of water every day. Signs of a leaky toilet include the following:

    • Water that turns on and off intermittently during the day
    • Water ripples in the toilet bowl
    • Water that runs in the tank unless you jiggle the handle

    Simple Test for a Toilet Leak

    Following is a simple test you can conduct to see if you have a leaky toilet:

    • Mix a few drops of dark food coloring in the toilet tank.
    • Don't flush the toilet for about an hour.
    • After an hour, check the toilet bowl.
    • If food coloring has appeared in the bowl, you have a leak.

    Check the Water Meter

    A final check can let you know if there is an undetected leak somewhere in your house. Check the water meter when no one is using any water. Many new meters are equipped with a leak-detection gauge. The gauge may be shaped like a triangle or a gear. If the leak detection gauge is spinning you probably have an undetected leak. Older water meters may not have the leak-detection gauge. In this case look at the dial that shows how many gallons per minute are being used. If the dial is moving at all you might have a leak. If you suspect an undetected leak call Roto-Rooter to help you locate the problem.

     


  • Jersey City Roto-Rooter Offers Leak Detection Tips

    If left untreated, a leak in a bathroom fixture or pipe can cost a lot of money in repairs, especially if it causes serious damage to the walls, flooring and paint. But many of the signs of a leak are not obvious.  Here are some tips from Jersey City Roto-Rooter to catch the subtle clues to possible bathroom leaks.

    1. Mildew or Mold- even if you scrub and clean the bathroom daily, mold and mildew will continue to appear if there is a faulty leak in the plumbing. Mold thrives on moisture and dark areas in objects like pipes, walls, flooring. The longer it takes for leak detection, the faster the mold will grow.
    2. Damaged Paint or Wallpaper- when water and moisture get between the paint and wallpaper and the wall, it eliminates the bond and begins to separate the two. Eventually the paint will chip off and fall and the wallpaper will come completely loose.
    3. Damaged Walls- water damage due to leaks can cause warped or stained walls because when dry wall is exposed to water it becomes soft and begins to bubble.
    4. Damaged Flooring- a leak can cause a bathroom floor to buckle, crack and begin to stain. Depending on the type of flooring, moisture can make it spongy and soft and become completely loose.
    5. Stains on Ceiling-stains on the ceiling of a lower floor are good indications of leaking in the bathrooms or water supplies in the upper levels. Any brown, copper or dark stains are probably caused by water damage and leakage above.
    6. Smell- old, accumulated water from a leak in a pipe tends to smell and give off very musky, unwelcoming fumes. Because the water is hidden it never gets the chance to dry.

    You can save on these costly problems and on your water bill if you detect leaks and stop them fast.  Jersey City Roto-Rooter can help detect leaks and correct them in bathrooms and other sinks, etc. throughout the home.


  • Ice makers can cause serious water damage when they leak

    Ice makers can be a convenient feature to have on your refrigerator, but as one of our customers recently learned, they can occasionally cause big problems - so you need to be careful. While vacuuming her living room carpet our soon-to-be customer noticed that her carpet was soaking wet and there were mushrooms coming up through the carpet! Naturally, she thought that she had a slab leak. So the first thing she did was call the top name among Memphis plumbers, Roto-Rooter of Memphis.

    Fred Simmons, Roto-Rooter of Memphis' most experienced leak locator, was dispatched to the customer's home and discovered that the problemwas caused by a cracked water supply tube leading to the refrigerator's ice maker. This was a simple repair with a $5.00 part. However, the amount of water damage that this kind of water leaking problem can cause to carpet, drywall or wood flooring is another story altogether. So here is what everyone with an ice maker should learn from our customer's unfortunate experience: Check the condition of the water supply tubing that feeds the ice maker on your refrigerator! If the line is cracked, dry or brittle, change it immediately. You will be glad you did.

    How do you check it? Carefully pull your refrigerator away from the wall. Go slow and get help. For safety's sake, have someone else assist you. Get behind the refrigerator and sweep away the dozens of dust bunnies that have accumulated. You will notice a small diameter plastic or copper tube clipped to the back of the unit that is runs vertically along the surface. This is your water supply line. Use a vacuum to remove dust from around the tube and go ahead and vacuum dust from all of the vents. Then inspect the tubing carefully. Look for signs of water on the floor. If the tubing shows any signs of stress or it is more than ten years old, consider replacing it with a new tube, preferably a flexible stainless steel tube instead of a plastic one. Just like a washing machine hose, these water supply lines can burst or leak and can cause lots of damage before you notice the problem.

    If you are not sure what is causing a mysterious water leak at your home or business, you can always call Roto-Rooter Plumbers in Memphis at 901-323-4285 or contact any Roto-Rooter location across the nation at 1-800-ROTO-911. Roto-Rooter has experienced Memphis plumbers and the most advanced leak-detecting equipment available to solve your mystery and fix the problem.


Copyright © 2006-2017, Roto-Rooter Group, Inc. All rights reserved.
All services may not be available from all locations.
Close

GET FAST SERVICE & INFORMATION

We use your ZIP code to give you local services and offers.