Water Heater Repair Is Important

Water Heater Repair Is Important

The home plumbing system is a minefield of potential headaches and frustrations if you do not properly equip yourself with detailed information, products, and proper tools. For many people with a lack of experience, plumbing can be especially challenging in pinpointing exactly where problems are occurring. Due to the nature of how plumbing runs behind the scenes in a house, problems that finally make themselves visible are the result of quite a large issue beneath the surface.  Water heater repair services provided by Roto-Rooter can help you keep this particular appliance from biting the dust before it needs to. Use the following guide of tips and tricks for keeping yours in good repair.

Water Heater Tune-ups

Roto-Rooter technicians are trained experts that are extremely familiar with a wide range of water heater models. There is hardly a problem out there they haven't already seen and successfully maintained over the years. They know that a well-maintained water heater could last almost twice as long as a normal unit could and perform at full capacity during the entire time. To find out what kind of tune-up services are available to you; call Roto-Rooter today to set up an inspection with one of our technicians.

Safety First

Even if you have a guide to follow, make sure to be extremely careful when dealing with home repairs that have to do with the water heater. Since there are all sorts of wire, gas, hot water, and more going on in any given unit, one slip up could result in electrical shock, fire, a gas leak, and water burns. If you do not feel completely comfortable performing a repair, perhaps call someone or refer to an authority that can guide you along step by step upon completion.

Water Heater Flushing

One of the best things that you can do for your water-heating unit is to simply flush out the system every now and again. Doing this will keep things clean and help the system release building pressure inside. Use these water heater repair steps for success:

First, attach a hose to the drainage valve on the bottom of the heater and run the hose to a nearby sink.

  • Open the drainage valve and let all of the hot water run out.
  • Let the cold water continue to pass through and flush out the system.
  • Close the drainage valve tightly and allow the tank to fill all the way.
Copyright © 2006-2016, Roto-Rooter Group, Inc. All rights reserved.
All services may not be available from all locations.


We use your ZIP code to give you local services and offers.